Powersolve MHP100 Series Manual de usuario descargar pdf

www.powersolve.co.uk

Powersolve Electronics Ltd. 8A, Arnhem Road, Newbury, RG14 5RU. England

Tel:01635 521858 Fax: 01635 523771 Email: [email protected]

AC-DC Converters

MHP Series

40W-100W

Features

• Compact Size - High Power Density

• Industrial & Medical Approvals

• Low Leakage Current

• Level B Conducted Emissions

• EN61000-3-2, -3 Compliant

• Convection Cooled

• Class II Approved 40-60 W Models

INPUT

Input Voltage 90-264 VAC (120-370 VDC)

Input Frequency 47-63 Hz; 440 Hz

Input Current 40 W: 0.4 A max at 230 VAC, 60 W: 0.6 A max at 230 VAC, 100 W: 0.9 A max at 230 VAC

Inrush Current 40 A max at 230 VAC

Earth Leakage Current <100

A at 115 VAC, <200

A at 230 VAC

Input Protection Internal 3.15 A fuse in line and neutral

OUTPUT

Output Voltage See tables

Output Voltage Trim ±5% on 3.3 V & 5 V versions, ±10% on other single output models and V1 of multi-output models.

See note 1 for MHP40/60 models

Initial Set Accuracy ±1.0% V1, ±5% V2, V3 & V4

Minimum Load See tables

Start Up Delay 2 s max

Start Up Rise Time 50 ms

Hold Up Time 16/75 ms min at 115/230 VAC

Line Regulation ±0.5%

Load Regulation ±1% single output models; ±3% V1, ±5% V2 & V3 MHP40/60 multi-output models. ±1% V1 & V2, ±5% V3 & V4 MHP100

Cross Regulation 2% on MHP40/60 only

Over/Undershoot None at turn on/off

Transient Response 4% max. deviation, recovery to within 1% in 500

s for a 25% load change

Ripple & Noise 1% pk-pk, 20 MHz bandwidth

Overvoltage Protection

15-135% Vnom, recycle input to reset

Overload Protection

10-150% on primary power limit, auto recovery

Short Circuit Protection Trip and restart (Hiccup mode)

Temperature Coefficient 0.05%/°C

GENERAL

Efficiency 80-85% depending on model

Isolation 4000 VAC Input to Output, 1500 VAC Input to Ground, 500 VAC Output to Ground

Switching Frequency 70 kHz typical

Power Density 60 W: 6.25 W/In

, 100 W: 7.40 W/In

MTBF 250 kHrs per MIL-HDBK-217F

ENVIRONMENTAL

Operating Temperature 0 °C to +70 °C. Refer to derating curves for specific operating limitations.

Cooling Convection & fan cooled ratings (see derating curves)

Operating Humidity 95% RH, non-condensing

Storage Temperature -20 °C to +85 °C

Operating Altitude 3000 m

Shock 30 g pk, half sine, 6 axis

Vibration 2 g rms, 5 Hz to 500 kHz, 3 axis

EMC & SAFETY

Emissions EN60601-1-2, EN61204-3, FCC 20780, EN55022 & EN55011, level B conducted

Harmonic Currents EN61000-3-2

Voltage Flicker EN61000-3-3

ESD Immunity EN61000-4-2, level 2 Perf Criteria A

Radiated Immunity EN61000-4-3, 10 V/m Perf Criteria A

EFT/Burst EN61000-4-4, level 3 Perf Criteria A

Surge EN61000-4-5, level 3 Perf Criteria A

Conducted Immunity EN61000-4-6, 10 V Perf Criteria A

Dips & Interruptions EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B

Safety Approvals EN60950, UL60950, CSA 22.2 601.1, EN60601-1, UL60601-1, CCC pending, contact sales

Electrical Specification

1 2 3 4

Indice de contenidos

Pagina 1 - AC-DC Converters

www.powersolve.co.ukPowersolve Electronics Ltd. 8A, Arnhem Road, Newbury, RG14 5RU. England Tel:01635 521858 Fax: 01635 523771 Email: sales@powerso

Pagina 2

www.powersolve.co.ukPowersolve Electronics Ltd. 8A, Arnhem Road, Newbury, RG14 5RU. England Tel:01635 521858 Fax: 01635 523771 Email: sales@powerso

Pagina 3

J1 mates withMolex housing 43061-0003 &Molex series 5194 crimp terminals.Optional ground (0.25 faston) tabavailable, contact sales.J2 mates withMo

Pagina 4 - Output Connector J1

J1 mates with Molex housing 43061-0003and Molex series 5194 crimp terminals.Optional ground (0.25 faston) tab available.J2 mates with Molex housing 43

Comentarios a estos manuales

Sin comentarios

Powersolve MHP100 Series Manual de usuario

Busca en linea o descarga Manual de usuario para Proveedores De Energía Powersolve MHP100 Series. Powersolve MHP100 Series User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Proveedores De Energía Powersolve MHP100 Series